Combined test units G7-1C / G7-1P
BestPerformance
BestPerformance unit series
Cost-effective and user-friendly. The black and white styled touch panel simplifies operation of the test units, which are equipped with an Ethernet port as standard (optionally available: RS-232 or USB).
Combined DC test unit (HV DC)
The test unit is also available as an automated unit. This permits versatile use for application scenarios in manual or automated systems for protective conductor continuity testing, insulation resistance testing and hi-pot testing of systems, parts and components.
With Touch-Panel: G7-1C
Without Touch-Panel: G7-1P
- 19” slide-in system
- High-quality metal housing
- Access lock via configurable password entry stage
- Service-friendly – can be replaced in just a few steps
- Interfaces: Ethernet; RS-232-C or USB as alternatives
Hi-pot testing
0.05 … 6.00 kV • 0 … 100 μA • 0 … 10.00 mA
Voltage ramp
User-programmable for start and end of test
Protective conductor
0 … 500 mΩ • 12 VAC/>10 A
Insulation resistance
1.00 • 10.0 • 100 MΩ • 1 GΩ
Nominal capacity
30 W
Interface
Ethernet • Digital interface
Line voltage
230 V, +/−10%; 49 … 61 Hz
Form factor
19”/4 RU; depth 360 mm
Voltage read-back
Module enables four-wire measurement by read-back of test voltage.
Insulation resistance testing expansion
Measurement range 1.0 GΩ
Additional digital outputs
Six digital outputs for controlling an external switchover matrix
RS-232-C
Alternative interface instead of Ethernet port
USB
Alternative interface instead of Ethernet port
Software package
Elution® Device
- 19” housing/4 RU 93-1B
- Mobile Primus Basic test unit
- Test gun 94-2A Z02m, 1 pc
- Warning lamp F9-1A
- Two-hand control F9-1L-01
- Manual start button F9-1W
- Test cage 94-3A/B
- Dummy module F9-4K
- Connection box F9-7A
- Connection cable F9-7D/E
- Protective conductor test probe 94-4S
- Test gun 94-2A Z02m, 1 pc
pdf / 9 MB