Combined test units G8-1A
BestPerformancePlus
BestPerformancePlus unit series
The G8 combi-tester is part of the new series of BestPerformancePlus devices. These extend the well-proven BestPerformance devices by two additional functions: On the one hand a functional test (voltage, current and power measurement) and on the other hand a continuity test with 24 V AC.
Combined DC test unit (HV DC)
The G8 combi-tester thus combines reliable PE conductor measurement, insulation resistance measurement, continuity and function test with voltage normalization as well as a high-voltage test in one device. This last test is possible for AC or DC, depending on the type of device. A functional test can be performed up to 16 A / 4000 VA.
The G8 combi-tester allows flexible use in both manual and automated systems. For use in automated systems, the device is equipped with a extensive Elution® software package including SQL database. A scratch-resistant and high-contrast touch display allows manual use. An open Ethernet interface offers the possibility for integration into computer-controlled applications.
The G8 combi-tester can be used in 19" system control cabinets as well as in a housing.
The system is rounded off by accessory components specifically configurable for this model.
With Touch-Panel: G8-1A
- 19” slide-in system
- High-quality metal housing
- Access lock via configurable password entry stage
- Service-friendly – can be replaced in just a few steps
- Interface: Ethernet
Hi-pot testing
0,05 kV .. 6,0 kV DC earthbound
0 .. 0,05 mA / 0 .. 0,5 mA / 0 .. 5 mA
Voltage ramp
User-programmable for start and end of test
Protective conductor
0,001 ... 1,200 Ω
6 or 12 V AC
5 .. 32 A
Insulation resistance
0,05 kV .. 6,0 kV DC earthbound
2,5 MΩ / 25 MΩ / 250 MΩ / 2,5 GΩ
Functional test
ext. 50 .. 300 V
max. 16 A
max. 4000 VA
49 - 61 Hz
Continuity check
max. 24 V
max. 2 A
5 .. 1000 Ω
Nominal capacity
30 W
Interface
Ethernet • Digital interface
Line voltage
230 V, +/−10%; 49 … 61 Hz
Form factor
19” / 4 HU; depth 360 mm
Insulation resistance testing
Measurement range 2.5 GΩ
Voltage read-back
The module enables four-wire measurement by read-back of test voltage
Additional digital outputs
Six digital outputs for controlling an external switchover matrix
RS-232-C
Alternative interface instead of Ethernet port
USB
Alternative interface instead of Ethernet port
Software package
Elution® Device
- 19” housing / 4 HU 93-1B
- Mobile Primus Basic test unit
- Test gun 94-2A Z02m, 1 pc
- Warning lamp F9-1A
- Two-hand control F9-1L-01
- Manual start button F9-1W
- Test cage 94-3A/B
- Dummy module F9-4K
- Connection box F9-7A
- Connection cable F9-7D/E
- Protective conductor test probe 94-4S
- Test gun 94-2A Z02m, 1 pc
- Factory calibration G8-1A E99
pdf / 402 KB