HV test units BestPerformance G1-1B / G1-1N
0,05 .. 6,00 kV DC
The black and white styled touch panel simplifies operation of the test units, which are equipped with an Ethernet port as standard (optionally available: RS-232 or USB). All units are also available without a control module for easy integration with automated systems.
Hi-pot DC voltage tester
The test unit is also available without a control module: this enables versatile use for application scenarios in manual or automated systems for hi-pot testing and optionally for insulation resistance testing.
With Touch-Panel: G1-1B
Without Touch-Panel: G1-1N
- 19” slide-in system
- High-quality metal housing
- Access lock via configurable password entry stage
- Service-friendly – can be replaced in just a few steps
- Interfaces: Ethernet; RS-232-C or USB as alternatives
Test voltage
0.05 … 6.00 kV DC
Voltage ramp
User-programmable for start and end of test
Nominal capacity
12 W
Trip current
0 … 20.0 μA • 0 … 200 μA • 0 … 2.00 mA
Interface
Ethernet • Digital interface
Line voltage
230 V, +/−10%; 49 … 61 Hz
Form factor
19”/4 RU; depth 360 mm
Insulation resistance testing
Measurement range 5.00/50.0/500 MΩ/5.00 GΩ
Voltage read-back
Module enables four-wire measurement by read-back of test voltage
Additional digital outputs
6 digital outputs for controlling an external switchover matrix
RS-232-C
Alternative interface instead of Ethernet port
USB
Alternative interface instead of Ethernet port
Software package
Elution® Device
- 19” housing/4 RU 93-1B
- Mobile Primus Basic test unit
- Test gun 94-2A
- Warning lamp F9-1A
- Two-hand control F9-1L-01
- Footswitch F9-1D
- Test cage 94-3A/B
- Dummy module 94-2M Z01
pdf / 9 MB