HV test units HighPerformance F1-1A / F1-1M
100 .. 2.500 V AC, 200 .. 5.000 V AC
The multi-coloured touch panel enables ergonomic operation of the test units, which are equipped with a serial RS-232-C port as standard (optionally available: Ethernet or USB). All units are also available without a control module for easy integration with automated systems.
Modular hi-pot test unit
Depending on the variant and expansion status, the units offer versatile deployment options in manual and automated scenarios for hi-pot or insulation resistance testing of systems, parts or components.
With Touch-Panel: F1-1A
Without Touch-Panel: F1-1M
- 19” slide-in system
- High-quality metal housing
- Access lock via configurable password entry stage
- Service-friendly – can be replaced in just a few steps
- Interfaces: Ethernet; RS-232-C or USB as alternatives
Test voltage
100 … 2,500 V AC, 200 … 5,000 V AC, 200 … 3,000 V DC (optional), 300 … 6,000 V DC (optional)
Voltage ramp
User-programmable for start and end of test
Nominal capacity
500 VA
Trip current
0 … 1/10/100 mA
Interface
RS-232-C
Line voltage
230 V, +/−10%; 49 … 51 Hz*
Form factor
19”/4 RU
DC voltage
Test voltage: 200 … 3,000/6,000 VDC
Trip current: 0 … 1/10/100 mA
Insulation resistance
0.1 … 1/10/100 MΩ + auto-range
Safety current limiter
<3 mA with AC; <5 mA with DC
Voltage read-back
Module enables four-wire measurement by read-back of test voltage
Burn function
Overcurrent tripping can be deactivated for troubleshooting
Additional digital outputs
6 digital outputs for controlling an external switchover matrix
Ethernet
Alternative interface instead of RS-232-C port
USB
Alternative interface instead of RS-232-C port
Software package
Elution® Device
- 19” housing/4 RU 93-1B
- Mobile Primus Basic test unit
- Test gun 94-2A
- Warning lamp F9-1A
- Two-hand control F9-1L-01
- Test cage 94-3A/B
- Prüfkäfig 94-3A/B
- Dummy module 94-2M Z01
pdf / 9 MB