HV test units HighPerformance F1-1C / F1-1P
300 .. 5.000 V AC, 400 .. 10.000 V AC
The multi-coloured touch panel enables ergonomic operation of the test units, which are equipped with a serial RS-232-C port as standard (optionally available: Ethernet or USB). All units are also available without a control module for easy integration with automated systems.
Modular hi-pot test unit
Depending on the variant and expansion status, the units offer versatile deployment options in manual and automated scenarios for hi-pot or insulation resistance testing of systems, parts or components.
With Touch-Panel: F1-1C
Without Touch-Panel: F1-1P
- 19” slide-in system
- High-quality metal housing
- Access lock via configurable password entry stage
- Service-friendly – can be replaced in just a few steps
- Interfaces: Ethernet; RS-232-C or USB as alternatives
Test voltage
300 … 5,000 V AC, 400 … 10,000 V AC, 400 … 6,000 V DC (optional), 500 … 12,000 V DC (optional)
Voltage ramp
User-programmable for start and end of test
Nominal capacity
500 VA
Trip current
0 … 1/10/50 mA
Interface
RS-232-C • Digital interface
Line voltage
230 V, +/−10%; 49 … 51 Hz
Form factor
19”/6 RU; depth 360 mm
DC voltage
Test voltage: 500 … 6,000/12,000 VDC
Trip current: 0 … 1/10/50 mA
Insulation resistance testing
0.1 … 1/10/100 MΩ + auto-range
Additional digital outputs
Six digital outputs for controlling an external switchover matrix
Ethernet
Alternative interface instead of RS-232 port
USB
Alternative interface instead of RS-232 port
Software package
Elution® Device
- Housing 19”/6 RU 93-1C
- Mobile Primus Basic test unit
- 94-2A ZF1-1C
- Warning lamp F9-1A
Two-hand control F9-1L-01
pdf / 9 MB